There are many services that can be streamed to a projector, but this post is going to teach you how to watch Hulu on a projector.
Watching Hulu on your projector will allow you to have some great entertainment in the living room without having as much eye strain from TV screens. Read on for more information!
In this article, we will talk about the steps needed in order to watch Hulu content onto your projector so you can enjoy movies and TV shows at home without worrying about screen time or eye strain from watching it too closely.
This article will go over what equipment will be needed, as well as all of the steps necessary in order for this process which should take no more than 15-20 minutes.
What is Hulu?
As stated in the article that outlines what Hulu is, it is a streaming video-on-demand service that offers TV shows and movies for discounted or free. It gives subscribers the ability to watch as well as play, pause, and resume those files with ease from any place they happen to be.
By using an internet-connected device like a smart TV, mobile device, or computer to stream the content, users of Hulu can access their content from anywhere. This allows users to stream when and where they want without physical constraints, such as being near a TV or cable box.
History of Hulu
Hulu is a joint venture and video-on-demand service from Fox Network, Disney, NBC Universal, and Comcast.
It was launched in March 2007 with limited advertising. The goal and mission of Hulu have been to be a completely ad-free, on-the-go streaming service that gives users access to their favorite TV shows and movies without any lag time or buffering time.
Since its launch in 2007 as a small startup company, Hulu has grown to be one of the largest internet streaming companies in existence today. It contains over 8 million videos in its library at the time of this writing.
How to Watch Hulu on a Projector | 6 Methods
As previously mentioned, this post will show you how to watch Hulu on a projector. The goal of this tutorial is to display your projector’s output via HDMI so that you can connect it to any TV or projector with an HDMI port. The steps below will tell you how to hook everything up and start streaming!
Equipment Needed for Hulu Streaming:
- A projector (preferably an HD projector)
- A smart device/ computer with Hulu installed
- An HDMI cable to connect your smart device/ computer to the projection
- An internet router/ access point
Step 1: Determine Your Internet Connection Speed
In order for you to be able to stream from your device, you must determine what kind of internet connection speed that you have.
This will help you determine the best type of cable or dongle you need in order to view your Hulu video on a projector. This can be done by doing a speed test through your internet service provider.
This will allow you to determine whether or not you are connected at a certain speed, and if it is running correctly. If you cannot get the result that you desire, then you should check the next step!
Step 2: Determine If You Need an Adapter for Hulu
If your setup happens to not be able to use HDMI output via your computer or cable box, then there may be another option for you. If you have a cable box, you will probably be able to use a dongle that will allow you to push your signal out of your computer or cable box and onto any TV with an HDMI port.
This adapter is an HDTV antenna dongle that will convert your WiFi or Ethernet signal into something that can be sent through an HDMI port on the back of your TV. This option will allow you to watch Hulu using any type of TV since it uses an HDMI port in order to transmit its content.
Step 3: Connect Your Device to Your Computer or Cable Box
Once you have determined the type of adapter you will need, then it is time to connect your device to your computer or cable box. This is where you will start hooking things up in order to start streaming Hulu content.
Plug one end of the HDMI cable into your computer, or the back of your cable box making sure it is into the HDMI port on the back. Next, connect one end of the micro-USB power cable (known as a USB OTG cable) into your computer, or if you are using a cable box with an Ethernet connection, connect that end into your Ethernet port.
Step 4: Determine the Right Settings for Your Device
Next, we will have to figure out what settings are used on the device that you are connecting. This will help you determine if the device is sending just a video signal, or if it is sending audio as well.
Referring back to the type of internet service speed that you determined in step 1, your best bet would be to find out how fast your internet speed is and adjust your streaming settings accordingly.
If you have an offline option being offered by Hulu, then go ahead and experiment with that as well instead of following these steps. Then test with different HDMI cables, and if possible make sure they are of an enabled type of HDMI designed specifically for viewing projected content.
Step 5: Test in Different Projection Modes
If you are using a projector that is not capable of sending an HDMI signal out to your TV, then you will need to find out if you can use another mode on the projector itself. This will be important because this will determine how you test and set the correct settings on your device.
To do this, go ahead and plug your device into the projector via RCA or composite cables. This is especially important if you are using an older projector without HDMI support, which can be normal for older projectors.
Then access the menu on your device that has video output settings in order to change it to HDMI input instead.
With this setting, you will be able to use your device’s input rather than using the port on the projector itself. Once you have made the selection, turn on your device and test it out so you know what to expect.
Step 6: Make Sure Your Device Can Communicate Through an HDMI Port
Before starting this next step, make sure that your device receives a signal from an HDMI port on the projector. This is especially important if you are using an older projector with analog video ports on the back. Then plug your device into the projector and follow these steps:
Access your menu settings and go to its video output screen. Find out what you need to enter in order to set your device to output a signal via HDMI or vice versa.
If it states that it is connected through a composite port, then you will have to change it from there instead. Some devices use the same HDMI on the back for both their online requirements and offline options, which means you will need to go into its settings so you can tell what port it is receiving signals from.
Different Ways to watch Hulu on the projector
- Screen Mirroring
- Wi-FI and Hulu Streaming
- HDMI Linkage for Hulu Streaming
- Through AirPlay
- Projecting Hulu via Chromecast
- Buy a Hulu-Ready Projector
1. Screen Mirroring
Screen mirroring is a technology that allows you to mirror what is displayed on your device on a screen remotely. This can be done by either connecting your device directly to the TV or by using an adapter that can make it possible for you to connect your device to the projector.
If you are using Apple devices, then it is very easy to do this since they have a wireless remote and HDMI ports. The only thing that you need to know about this is that your screen should be of large size in order for you to comfortably watch videos with ease.
2. Wi-Fi and Hulu Streaming:
Like many other apps, Hulu allows you to stream videos without creating an account first. You can do this by simply downloading the app and enjoying streaming.
You can also use your home network to stream videos on your TV but you need to be very cautious when doing this since it may compromise your device’s security. This is why you need to keep a keen eye on what other people can see and whatnot.
If you wish to enjoy some of those videos that are not available for streaming, then you will have to create an account first. This makes it possible for you to access all the content in their app once you have registered for an account.
3. HDMI Linkage for Hulu Streaming
It is possible to set it up with your TV or receiver’s HDMI port. You will get the best results in an HDTV that has a resolution of 1080p as well as high-quality sound output. The app can be streamed on any kind of device that supports streaming content from Hulu; you can even use the app on mobile devices and tablets.
4. Through AirPlay
If you are using a compatible receiver then you can stream content from your device to the projector through AirPlay to give you a bigger screen. It is also important that the device is facing the receiver or TV if it is on an extra-large screen or if it is very high up. The higher it is, the better.
5. Projecting Hulu via Chromecast
Hulu does not allow users to activate Chromecast directly from their app, so you will have to install the Cast extension that will help you install and use Hulu via Chromecast easily with any of your devices that meets its requirements and specifications concerning video output and bandwidth.
6. Buy a Hulu-Ready Projector:
If you are not quite sure if you will be able to get the quality that you want, then you can always consider purchasing a new HD projector with HDMI support that will allow for content streaming. This will ensure that your movie or TV show will have its quality enhanced as well as your view.
Projector manufacturers often make their projectors to be in a state where they are usable even with an HDMI cable already plugged into them. If this is the case, then there will be no need to use the RCA inputs for anything else.
However, if you are using an older device that has not been updated, you may need to make some adjustments on your own in order to ensure that your device is connected and ready for use. The above steps will help you identify any issues with connecting your devices easily and quickly.